|
An update to our 2019 blog post. Winter weather can create hazardous conditions around your facility. Even when parking lots and sidewalks have been shoveled or plowed, a thin layer of ice can remain behind creating slick and dangerous surfaces that may be difficult to see. Even a light dusting of snow can become a problem when temperatures fluctuate and melting snow refreezes throughout the day. Thankfully we have some great ice melt products for you to choose from. When used correctly, ice melt can help break the bond between ice and the surface below, making it easier to remove and keep sidewalks, entrances and other high-traffic areas safer. Ice melt is a great tool but using it effectively takes more than simply spreading it on the ground. The following tips can help you get better results, avoid unnecessary product waste and protect your facility throughout the winter season. Use them to help develop an ice melt policy or training guide for your employees. Tips for Apply Ice Melt 1. Clear Away Snow First Before applying ice melt, remove as much loose snow as possible by shoveling, sweeping or plowing. Ice melt works best when it can come into direct contact with the ice underneath rather than sitting on top of several inches of snow. Once the ice melt begins working, it helps break the bond between the ice and the pavement, making the remaining ice and slush easier to remove. Clearing the area first also means you'll need less product to get the job done.
3. Pay Attention to the Temperature Not all ice melt products perform the same way, especially as temperatures drop. Different deicing ingredients have different effective temperature ranges, so it's important to choose a product designed for the conditions you're expecting. Remember to look at the pavement temperature, not just the air temperature. Pavement can remain colder than the surrounding air and directly affects how well your ice melt will work. Having more than one type of ice melt available may also be beneficial for facilities dealing with changing winter conditions. Your ALCO Account Manager can help you determine which products are best suited for your facility. 4. Know What's in Your Ice Melt There are several common ingredients used in ice melt products, and each has different characteristics. Understanding the basics can help you select the right product for your facility.
5. Give Ice Melt Time to Work Ice melt doesn't work instantaneously. After applying it, allow the product time to penetrate the ice and begin breaking its bond with the pavement. Once the ice has loosened, remove the resulting slush and remaining ice whenever possible. Leaving melted snow and slush behind can create another hazard if temperatures drop and the moisture refreezes. During changing weather conditions, periodically check sidewalks, entrances and other high-traffic areas to determine whether additional attention is needed. 6. Protect Your Floors with Entrance Matting Proper ice melt application can help keep outdoor areas safer, but some of that product will inevitably make its way inside on people's shoes. Entrance matting is your first line of defense against tracked-in ice melt, moisture, dirt and other winter contaminants. A properly designed matting system gives people enough distance to wipe and dry their shoes as they enter the building, helping prevent contaminants from traveling farther into your facility. As a general guideline, 10 to 15 feet of entrance matting can capture approximately 85% to 95% of contaminants entering a building. Keep mats clean and maintained throughout the winter so they can continue doing their job effectively. 7. Remove Tracked-In Ice Melt Residue Even with proper ice melt application and matting, some ice melt residue might still make its way onto your floors. If you've ever noticed a white, hazy film appearing near entrances during the winter, ice melt is often the culprit. Repeatedly cleaning the area with a traditional floor cleaner may not completely remove the residue. Using a product designed to neutralize ice melt can make cleanup easier and help prevent buildup. ALCO Freedom #8250 is a heavy-duty, all-purpose, non-dulling cleaner that neutralizes ice melt residue in one application, where other floor cleaners may take two or three applications. Freedom can be used on a variety of hard floor surfaces and also works as a carpet pre-spray to help remove tracked-in ice melt stains. Pairing proper entrance matting with a winter floor-cleaning program can help keep your facility looking its best throughout the season
Make Ice Melt Part of Your Winter Maintenance Plan
Using ice melt correctly can help you get more from your product while maintaining safer sidewalks, entrances and high-traffic areas throughout the winter. Just as importantly, planning for what happens after ice melt is applied can help reduce track-in and protect the floors inside your facility. ALCO can help you prepare for winter with ice melt products, entrance matting and floor care solutions for removing tracked-in residue. Talk with your ALCO Account Manager to find the right combination of products for your facility and put a winter maintenance plan in place before the next storm arrives.
0 Comments
Your comment will be posted after it is approved.
Leave a Reply. |
Archives
September 2026
Categories
All
|




RSS Feed