ALCO Aerosols > Blast Off Jr.
|
Blast Off Jr. is a heavy foam cleaner that clings to oven surfaces and allows extended time to cut through baked on food, grease and carbon. Its institutional strength is formulated to cut through and remove heavy layers of baked on deposits. Blast Off Jr. is a simple way to keep porcelain enamel, iron, stainless steel and non-decorative interior chrome-plated surfaces sparkling cleaning.
AVAILABLE IN: 20 oz. aerosol cans; 12 cans/case
|
|
DIRECTIONS FOR USE:
ATTENTION: Read and follow all Directions and Precautions before using. Consult your ALCO representative with any questions.
ONLY TO BE USED ON: porcelain enamel, iron, stainless steel and non-decorative interior chrome-plated surfaces.
DO NOT USE ON materials such as aluminum, chrome trim, glass, baked enamel, painted surfaces, floor or wall tile, linoleum or plastic. DO NOT get cleaner on or in electrical components such as switches, receptacles, bulbs, wires and connectors. DO NOT spray or get cleaner on the heating elements of electric ovens or the pilot lights, valves and lines of gas ovens.
PERSONAL PROTECTIVE EQUIPMENT (PPE): Wear long-sleeved, impermeable, caustic-resistant gloves and protective eyewear while using.
DAYTIME CLEANING:
ATTENTION: Read and follow all Directions and Precautions before using. Consult your ALCO representative with any questions.
ONLY TO BE USED ON: porcelain enamel, iron, stainless steel and non-decorative interior chrome-plated surfaces.
DO NOT USE ON materials such as aluminum, chrome trim, glass, baked enamel, painted surfaces, floor or wall tile, linoleum or plastic. DO NOT get cleaner on or in electrical components such as switches, receptacles, bulbs, wires and connectors. DO NOT spray or get cleaner on the heating elements of electric ovens or the pilot lights, valves and lines of gas ovens.
PERSONAL PROTECTIVE EQUIPMENT (PPE): Wear long-sleeved, impermeable, caustic-resistant gloves and protective eyewear while using.
DAYTIME CLEANING:
- Works well on room temperature surfaces, but for best cleaning action, preheat surfaces to about 200°F.
- In either case, turn off all electrical switches and any pilot lights before using product.
- To avoid damage from any overspray or drips, cover nearby floor and other surfaces with thick newspaper or polyethylene plastic.
- Remove racks and clean them separately. If so designed, remove oven door and clean oven-side surface separately.
- Hold can upright and SHAKE WELL
- Remove protective cap. Only aim spray opening toward surface to be cleaned, and never toward people, pets, or other surfaces.
- Spray 10” away from all surfaces to be cleaned, giving them a thin, even coating of foam.
- Refasten protective cap on container when not in use.
- Allow to penetrate and soften the food residue for about 10 to 20 minutes on cool surfaces, or 5 to 10 minutes on warm surfaces.
- Wipe off the softened residue with a wet cloth, sponge or paper towels.
- For heavily contaminated surfaces: Treat a second time using a scrubbing pad or stiff brush to aid in removal of stubborn residues.
- When cleaning is completed, put all equipment back in operating condition and heat surfaces to about 250°F for 5 minutes before putting any food on them.
- Follow the same directions as for daytime cleaning, but do not preheat surfaces.
- Allow active foam to do its penetrating, softening, and dissolving action while you sleep.
- Clean off the softened residue the next day.
- After using this product on food processing equipment and food contact surfaces, thoroughly rinse with potable water and heat surfaces to about 250°F for 5 minutes before putting any food on them.
|
Item #:
14718 |
Sizes:
20 oz. Can, 12/cs |
