ALCO Floor Care- Finishes > Infinity
|
Our bestselling, hardest finish - Today's solution for a long lasting, cleaner looking floors with fewer coats. Superior wet gloss look. High build finish – 3 coats is equal to 4-5 coats of normal finish.
Coverage is 1,500-2,500 square feet per gallon!
AVAILABLE IN: 4-1 Gal/Case , 5 Gallon Pail, 55 Gallon Drum
|
|
DIRECTIONS:
- FLOOR PREPARATION: For best results, floor should be stripped of all old finishes before applying #0444 INFINITY.
- Use floor stripper #0166 HYPER STRIP, #0168 MELTDOWN or #0169 BREAKAWAY in hot water for best results.
- Machine scrub with black stripping pad.
- Pick up old finish with wet vacuum.
- Immediately rinse floor with neutralizer and follow with 2 fresh water rinses.
- APPLICATION: Use only new wax mops (soaked in cold water) with clean buckets/wringers.
- Apply 3 coats of INFINITY using medium to thin coats. Apply evenly.
- If the floor is an old, worn, porous floor, seal floor with #0475 SEAL KOTE before applying finish.
- Allow minimum of 30 minutes dry time between coats.
- The floor may feel dry to the touch before 30 minutes, but in order to cure and prevent streaking/hazing, proper dry time must be allowed.
- Previous coat must be tack free after 30 minutes dwell time before recoating. (In extremely humid conditions, it is recommended not to apply floor finishes).
- Apply 3 coats of INFINITY using medium to thin coats. Apply evenly.
- DUST MOP DAILY.
- DAMP MOP THE FLOOR – INFINITY can be damp mopped or machine scrubbed with #0185 MAGNIFICENT SEVEN or any of Alco's neutral disinfectants (like DC-7 or WINTAFECT).
- OR
- DUST MOP DAILY.
- ONE STEP CLEAN & BUFF – Damp mop floor with #0191 BEYOND (diluted at 2 – 6 oz. per gallon of water), let dry and burnish floor for a brilliant shine. This process cleans and polishes in one step! INFINITY & BEYOND MAKE THE PERFECT PAIR FOR BEST RESULTS!
|
Item #:
0444-1 0444-5 0444-55 |
Sizes:
4-1 Gal/Case 5 Gallon Pail 55 Gallon Drum |
