ALCO Floor Care- Finishes > Sport Tread
|
Sport Tread finish contains tough, flexible urethane and acrylic polymers to protect and beautify all floors including vinyl composition, linoleum, stone and rubberized synthetic sports floors.
Coverage is up to 2,500 square feet per gallon!
AVAILABLE IN: 5 Gallon Pail
|
|
DIRECTIONS:
SYNTHETIC SPORTS FLOOR or RESILIENT FLOOR APPLICATION:
SYNTHETIC SPORTS FLOOR or RESILIENT FLOOR APPLICATION:
- Strip floors to remove old waxes, sealers and finishes.
- Rinse thoroughly #0185 MAGNIFICENT SEVEN neutral cleaner and let dry.
- With clean equipment apply thin, even coats of finish.
- Under normal conditions, allow to dry for 30 minutes between coats.
- For best results, apply a maximum of 4 coats in 24 hours.
- For best results in high traffic locations (such as supermarkets) and entranceways, apply four coats the first night, then follow-up a few days later with four more coats. This gives you the desired film thickness from which to properly maintain your floor.
- Dust mop frequently to remove gritty soil.
- Use #0185 MAGNIFICENT SEVEN neutral cleaner to damp mop spills as they occur. Damp mop or auto-scrub (with a red pad) nightly with #0185 MAGNIFICENT SEVEN.
- Buff if desired with high speed equipment and ultra-high speed pads.
- To repair and deep clean floor, apply #0195 CLEAN N’SHINE restorer with mop or auto-scrubber (with a red pad).
- Allow floor to dry.
- Burnish floor with high speed equipment. This finish also responds to spray buffing with conventional high speed equipment. Note: Dust mop after burnishing or spray buffing.
- Dust mop entire floor then scrub aggressively using #0195 CLEAN N’SHINE restorer and auto-scrub (with a red or blue pad). Blue for heavily marked or dirty floors.
- Rinse floor with #0185 MAGNIFICENT SEVEN neutral cleaner and allow to dry.
- Apply finish. Apply no more than 4 coats in 24 hours.
|
Item #:
1280-5 |
Sizes:
5 Gallon Pail |
